Stage 2 VQ37 Long Block Engine - Nissan 370z/Infiniti G37

Stage 2 VQ37 Long Block Engine - Nissan 370z/Infiniti G37
Item# VQ37-Stage2-Long
Regular price: $7,675.00
Your price: $6,880.00

Product Description

This Stage 2 VQ37 Long Block is good for someone who wants a safe naturally aspirated, turbo charged, or super charged Nissan 370z or Infiniti G37. The stage 2 package is good for up to 700-850 Rwhp(with added L19 Head studs). The Stage 2 VQ37 Long block comes with a full one year warranty against machining defects and comes with our 20+ years experience on building Nissan/Infiniti motors.

This Package includes:

Products in bold are upgraded from previous stage

Wiseco or JE Pistons .020 over
Eagle H Beam Rods
ARP Rod Bolts
Block inspected and cleaned
Block redecked
Block Bored and Honed using a Torque Plate
Rotating assembly balanced
Crank magnafluxed and the journals micro-polished
New Moly coated Race Spec main bearings installed
New Moly coated Race Spec rod bearings installed
Block prepped and assembled
New OEM Head Gaskets
Jim Wolf Technology(JWT) Exhaust Cams
JWT High RPM Valve Spring
JWT Valve Spring Shim
JWT Extended Cam Sprocket Bolts
JWT Cam Sprocket Bolt Washer
JWT Rear Camshaft Bolt
JWT Cam Bolt Seal - Copper
Heads inspected and cleaned
Heads redecked
Ported exhaust and intake runners
5 angle valve job
New OEM Valve stem seals installed
Valve Stem Heights set
Cold Clearance set
Heads prepped and assembled
New OEM Oil Pump

Engine will come with Heads bolted to block and torqued to spec

*** Ceramic/Moly Coating can be added to the Piston Tops and Skirts for an Additional $325. ***

*** Shipping will be by Truck Freight. Please contact us for a shipping quote. ***


Ceramic/Moly Piston Coating
Coating the piston reduces friction and wear, reduces part operating temperature, can increase horse power and torque, reduce or eliminate detonation, and allow tighter piston to wall clearances for a better ring seal.
Regular price: $350.00
Your price: $325.00
ARP VQ37VHR L19 Head & Main Stud Kit - Nissan 370z/Infiniti G37
The ARP VQ37VHR L19 Head and Main Stud Kit for the Nissan 370z and Infiniti G37.

The L19 head studs were produced due to head lift issues at high WHP where additional clamping force is needed. While standard ARP head studs can be torqued down to 65-70ft/lbs, these ARP made with 262,000psi tensile strength L19 steel can be torqued down to 90-95 ft/lbs easily, without breaking the stud. These are a direct drop in replacement, and require no special block modifications or machining.

ARP recommends the use of main studs over bolts whenever possible for several key reasons. First is the ability to obtain more accurate torque readings because studs don’t “twist” into the block. All clamping forces are on one axis. By the same token, there is less force exerted on the block threads, which contributes to improved block life (very critical on aluminum blocks). Finally, there are factors of easier engine assembly and proper alignment of caps every time.
Regular price: $870.00
Your price: $575.00
VQ37 Long Block Core
VQ37 Long Block Core
This core charge is charged when shipping an upgraded Long Block to you before you return your Long Block. The core charge will be refunded once a rebuildable core is returned to us.

Import Parts Pro, LLC
19505 Wied Rd
Suite E
Spring, Texas 77388
Tel: 281-288-0700
Fax: 281-288-0836
AIM: KyleatIPP
Yahoo: KyleatIPP