Haltech HT055007 Platinum PRO Plug-in Nissan Z32 Fairlady 300ZX

The Haltech Plug and Play Engine management system for the 1990-1995 Nissan 300ZX w/Manual Transmission is one of the best systems on the market today. If you are serious about tuning your Nissan 300ZX then this is for you.

Features:

Direct plug and play replacement of the OEM ECU, no re-wiring necessary.

Uses the cars factory sensors

Supports Sequential Injection (peak and hold) and Direct fire ignition

Windows 2000, XP, Vista, Windows 7 compatible software

Real time programming, instant hesitation free adjustment while engine is running

Fully user definable 32 x 32 mapping

Tuning via Volumetric Efficiency (VE), Injection time or Lambda Correction (MAF)

Diagnostic trouble code storing & Check engine light control(Access through laptop only )

Selectable onboard internal MAP sensor rated to 150kPa (up to 1.5 Bar or 22psi boost)*

Wideband “auto tuning” using user definable target AFR table

USB and CAN Communication Port

*External MAP sensors can be used for up to 7 Bar or 101psi Boost

Factory Outputs:

6 x Fuel Injector outputs

6 x Ignition outputs

N-VCT (Nissan Variable CAM Timing Control)

Tacho, Boost Control, AC Clutch Relay, Idle Control

Thermo Fan, Check Engine Light, Fuel Pump (Variable Speed)

Factory Inputs:

MAF sensors, Throttle Position Sensor, Oxygen sensors,

Coolant Temperature sensor, Vehicle Speed Sensor,

Fuel Temperature sensor, Knock Detection Sensor

Expansion I/O*:

2 x Analogue Voltage inputs

2 x Analogue Temperature inputs

4 x Digital Outputs

*Optional auxiliary harness required to be purchased Haltech Part # HT040003

Functions:

Dual Bank Closed Loop O2 Control

Knock Control

Long Term Fuel Trim

Over Boost

Rev Limiter

Closed & Open Loop Boost Control

Gear Setup

ACF On Base Tables

Transient Throttle Enhance

Decel Cut

Correction Tables: Fuel Ignition Boost:

Cranking

Air Temp Target Correction

Zero Throttle Gear Correction

Cylinder Trim

TPS Correction

Generic Correction 1

Generic Correction 2

Gear Correction

Post Start

Air Temp Duty Correction

Post Start

Miscellaneous:

Data Logging: 448Kb of onboard data logging, Storage for approx 40 minutes at 10 logs per seconds,6 channels of data

Max 20 channels logging capability

Tune can be password protected in software

Rugged anodized aluminum casing

Power Requirements:
Source: 8.6 to 16.5 Volts DC
Consumption: 530mA @ 12Volts DC


Physical Dimensions:
ECU Dimensions Length: 154mm (174mm with MAP nipple)
Width: 158mm Height: 42mm Weight: 680g (1.5 lb)


Applications: Nissan 300ZX (Z32)
Engine Codes: VG30 , VG30DETT
Transmission: Manual only (Automatic not supported)


The Kit includes: Pro Plug-in ECU, USB Cable, Programming Software CD, Quick Start Guide, Instruction Manual (on CD)

**** Free Ground shipping in the contiguous U.S.. Please contact us for a quote for shipping outside the contiguous U.S. or for express shipping ****