Perrin PSP-SUS-218 Rear Endlinks 04-07 Subaru STI Polyurethane
PERRIN Polyurethane endlinks are significantly less expensive then spherical bearings with out a huge sacrifice in performance.
OEM steel endlinks are small, flimsy and can fail if a larger rear swaybar is installed. OEM endlinks are week and will flex greatly after installing a stiffer aftermarket swaybar. This flexing makes your stiffer aftermarket swaybar feel less responsive. PERRIN polyurethane endlinks are made with stiff polyurethane bushings pressed into 6061T6 aluminum arms to provide a solid connection between your swaybar and chassis. This translates into a more predictable and better handling car.
Construction - PERRIN Sway bar endlinks are machined from solid 6061T6 aluminum and designed to accept our custom polyurethane bushings. The low profile design of PERRIN endlinks allow for ample clearance for even the largest diameter sway bars. Polyurethane bushings are a great alternative to someone wanting the race car type part, without the added maintenance or harshness of a Spherical bearing type endlinks. If you are interested in our spherical bearing endlinks.
Bushings - PERRIN endlinks feature 95a durometer custom made polyurethane bushings. We choose a stiff 95a durometer material to provide a feel similar to a solid spherical bearing endlink but without the harshness or noise that can be associated with them after years of use. Polyurethane is extremely durable, nearly maintenance free and less expensive then bearing type endlinks.
Weather Resistant - PERRIN polyurethane bushing endlinks were designed for those living in climates where your vehicle is commonly exposed to corrosive elements. The combination of aluminum, polyurethane, and yellow zinc plated hardware make PERRIN performance endlinks very weather resistant and unaffected by wet climates and road salt. For the ultimate extreme weather protection and off road race performance check out our XD Endlinks.
Hardware - PERRIN endlinks include high quality hardware. Included are high quality Grade 8 bolts and other hardware ensuring that you will not have a failure while driving around the track.
Jeff Recommended Part - Subaru's rear suspension has a flaw. Under certain driving conditions your endlinks can change position and flip under your control arms. This causes major damage to the suspension and of course the endlinks. I highly recommend installing sway bars, stout mounts and endlinks all at the same time. This allows you to adjust the swaybar to a position that will eliminate this from happening. We offer a kit that contains endlinks, stout mounts and bars. If you can afford to do it all at once, i would always recommend it.
5 Year Warranty -PERRIN Performance warrants to the original purchaser, all PERRIN products to be free from defects in material and workmanship within a sixty (60) months period from the date of purchase.
- (1) Set of PERRIN rear endlinks
- All necessary hardware
- 04-07 Subaru STI
- 04-08 Subaru Forester